Blasting Hose Strong Pressure Capacity
Blasting hose can be applied to mining, agriculture, forestry, factories, wood construction at room temperature to attract or drain and the general neutral liquid. Sandblasting Hose The main reason for this phenomenon is the system pressure is too high, more than the hose pressure capacity. And the rupture of the hose to reverse this phenomenon is mainly because the hose is installed or used in the process of being too much due to reverse.
Blasting hose to withstand high pressure, the body pressure deformation small. Tensile strength, resistance to curling fatigue fatigue, sandblasting hose glue layer has a good anti-oxidation and heat resistance, blasting hose burst pressure is generally not less than four times the working pressure. Blasting hose is divided into ordinary type (without joint) and with two kinds of joints, Sandblasting Hose with the joints of the blasting hose are conductive function. Through the use of sandblasting hose for steel equipment, oxygen, cooling and other special water. Low-pressure sandblasting hose This is mainly due to the layer of wet or corrosive substances caused by the role of weakened the hose strength, resulting in high pressure rupture. There is no reinforcement layer of the hose is not rust, Sandblasting Hose but the reinforcement layer appears irregular broken wire phenomenon. This is mainly because the hose by the impact of high-frequency impact.
Sandblasting hose Features:
1, hose selection of special synthetic rubber with, made of excellent oil, heat, aging resistance.
2, high pressure hose, pulse superior performance.
3, the tube with a close, the use of soft, Sandblasting Hose small deformation under pressure.
4, hose has excellent resistance to winding and fatigue resistance.
5, wire braided hose.
The inner layer of the hose directly carries the wear and erosion of the conveying medium and prevents it from leaking. The outer layer protects the skeleton layer from external damage and erosion. Sandblasting Hose The skeleton layer is the pressure layer of the hose, which gives the strength and rigidity of the tube. The working pressure of the hose depends on the material and structure of the skeleton layer.
Sandblasting hose Features: sandblasting hose plastic: the use of polyurethane and butyl rubber as the main raw material, into a special reinforcing agent. Sandblasting hose finished rubber color is yellow transparent state, with high wear resistance, high toughness, high pressure and other characteristics, Sandblasting Hose the outer plastic has a good resistance to aging and wear resistance. Hose burst pressure is not less than four times the working pressure, wear-resistant index is 2-3 times the ordinary sandblasting hose. In the case of
Blasting hose with high-quality rubbing cloth for the enhancement layer, flexible, pressure capacity; steel blasting hose with copper hose for steel wire weaving, working pressure is the cloth hose 3-4 times, with pressure level High, excellent resistance to flexion characteristics.
Blasting hose is mainly used for all kinds of tunnel engineering, well, cavern, Sandblasting Hose slope protection anchor, in the hydropower, mining, military defense and other fields have a wide range of applications.
Sandblasting hose Use: for the device in the wind pressure sandblasting machine sandblasting (or sand pills), rust and cleaning metal castings.